Camsecure Page Header Graphic
Camsecure Page Header 1200
IP Webcams and Cameras
Wireless IP Bridge Kit - Standard

Our wireless IP Bridge Standard kit will allow you to extend your IP network over the "IP Bridge" to a location up to 350 metres away from the source - LOS (Line Of Sight). The kit comprises a pair of IP Tranceivers and passive POE power units so you can power the units via a 12 volt DC supply or up the network cable using the supplied POE injectors only (not POE switches) if that is more convenient. Wireless data transfer rate for this kit is 450Mbps Maximum. If you need longer distance transmission or true POE powerd units and really fast data transfer then see our PRO kit or super long range wireless equipment. 

The kit is very easy to program with built in LED display so it is not necessary to use a computer in order to set them up. The wireless bridge kit operates in the 5.8Ghz band for improved quality and range and have built in antennas so you only have to mount and aim the units themselves to set up a point to point high quality wireless bridge - IP link.

The kit can operate in 3 modes, Access Point, Wireless Bridge or Repeater. use the wireless bridge kit to extend your network to buildings which have no wired connection, to connect CCTV cameras or connect one part of a site to the other etc.

5GHz Wireless IP Bridge Kit Standard

Wireless IP Bridge Kit Standard

£120.00

Suitable Mounting Pole and Fixings Here

5GHz Wireless IP Bridge Kit Specification


WLAN Standard: IEEE 802.11 ac/a
Radio Frequency - 5.8 GHz)
Wireless Data Speed: 450Mbps
LAN port 1 speed 10/100Mbps
LAN port 2 speed 10/100Mbps
Range 300 Metres (recommended maximum)
Easy Pair Technology: Yes
Support 1-1: Yes
Support 1-Many: Yes
Flat to wall or mount on pole bracket (pole not supplied)
Can use as Access Point, Bridge, Repeater modes
Power from 12 Volts DC Jack: Yes
Power from 24 Volt Passive POE unit: Yes (supplied)
Size 165mm x 88mm x 56mm
Supplied as a Pair - kit comprises 2 x as shown in picture

Note:- Supplied with Passive POE power units or can be powered from 12 Volts DC supply. NOT suitable for power direct from POE switch. For that you need our PRO kit or long range IP equipment.

This is a really useful kit for when you need to extend your wireless network a reasonable distance at a very reasonable cost. Connect another building and add Internet connectivity to an area that had none, connect your IP cameras from remote locations direct to your network or local NVR, there are many great uses for this wireless IP bridge kit. Remember that these devices are designed to operate - LOS (Line Of Sight) which means the devices must be able to physically see each other and wont work over hills or around corners or if anything is blocking their view of each other - but providing the two devices can look straight at each other (LOS) they will work just fine.

Social Media
Copyright-Banner