Connection And Mounting Box For PTZ Domes

Make connections in bracket
IP66 Waterproof
Wall mount fixing holes
Aluminium
Dimension (W x H x D): 297 x 248 x 107mm
Pipe Thread: M20(G1/2")
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 8.0Kg
Weight: 3.2Kg

This weatherproof connection box is ideal for making the connections to our PTZ domes outside. Connections are kept dry inside the box and the box can be secured to the mounting wall and the camera easily bolted to it via the pre-drilled holes which match the fixing holes of our range of PTZ cameras.

The Lid of the box is hinged to allow easy access to the connections inside without removing the camera from its fixings. 

Connection and mounting box for our Bullet Cameras

Material: Coated Aluminium
IP Rating: 66
Dimension (W x H x D): 134mm x 134mm x 55mm
Pipe Thread: M20(G1/2")
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 3Kg
Weight: 0.5Kg

This neat design mounting and connection box allows for easy fixing of our bullet style IP cameras and easy and secure weatherproof connections to be made. Box will also fit our pole mount brackets.

Connection and mounting box for our eyeball cameras

Material: Coated Aluminium
IP Rating: 66
Dimension (W x H x D): 134mm x 134mm x 51mm
Pipe Thread: M20(G1/2")
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 3Kg
Weight: 0.6Kg

This neat design mounting and connection box allows for easy fixing of our Eyeball/Dome style cameras and easy and secure weatherproof connections to be made. Box will also fit our pole mount brackets.

Corner Mount Bracket for our PTZ Dome Cameras

Material: SECC
IP Rating: N/A
Dimension (W x H x D): 243mm x 170mm x 138mm
Pipe Thread: N/A
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 10.0Kg
Weight: 1.7Kg

This neat design bracket allows our range of PTZ Dome cameras to be fitted to the outside corner of a wall.
This then permits a much wider angle of vision as the camera can rotate to view down both the sides of the building where fitted and anywhere within the arc.

Pole Mount Camera Bracket 

Material: SECC
IP Rating: N/A
Dimension (W x H x D): 130.4mm x 170mm x 45mm
Pipe Thread: N/A
Mast Diameter: 80~130mm
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 10.0Kg
Weight: 1.0Kg

Our pole mount bracket is pre-drilled to accept our range of IP and HD CVI camera's and PTZ domes.

The bracket is secured to the pole via large Jubilee clips and the camera secured to the bracket using the pre-drilled fixing positions.

You need to make sure that the pole has sufficient strength to support the load and also that the pole does not wobble excessively which could spoil the picture.

Small Eyeball mount - Deep Base

Suitable for hiding cable connections
Material: Aluminum
IP Rating: IP66
Use with eyeball domes size - Ø94 x 80mm
Use with eyeball domes size - Ø114 x 86mm
Colour: White
Size: Ø96.8 x 33.5mm
Load Bearing: 1.0Kg
Weight: 0.16Kg


Use our eyeball camera deep base mounts when you are unable to bring the fitted camera lead into the building or other dry location suitable for connecting to.

Connections can be made to the camera in the base and the cable to the base may come from behind or enter through threaded tubing connectors on the side or bottom.

The deep bases have threaded fixing holes which match the camera diameters shown. 

Medium Eyeball mount - Deep Base

Suitable for hiding cable connections
Material: Aluminum
IP Rating: IP66
Use with eyeball domes size - Ø119x98mm
Colour: White
Size: Ø122 x 33.5mm
Load Bearing: 3.0Kg
Weight: 0.45Kg


Use our eyeball camera deep base mounts when you are unable to bring the fitted camera lead into the building or other dry location suitable for connecting to.

Connections can be made to the camera in the base and the cable to the base may come from behind or enter through threaded tubing connectors on the side or bottom.

The deep bases have threaded fixing holes which match the camera diameters shown. 

Medium Internal Camera Bracket

Maximum load: 3Kg
Construction: Aluminium
Suitable for all body cameras


Suitable for all conventional boody style cameras. Uses standard fixing thread.

This bracket may be made longer or shorter qith a choice to use the curved section of the bracket also as needs arise by screwing the sections together.

Internal Use Only

Large Internal Camera Bracket

Maximum load: 3Kg
Construction: Plastic
Suitable for all body cameras

Suitable for all conventional boody style cameras. Uses standard fixing thread.

Internal Use Only

Universal Pole Mount Bracket for Wireless Devices

Universal bracket by Ubiquiti
Designed for walls or poles
Versatile & robust mounting solution
For use with our Wireless bridge and antenna's
Full 90° tilt adjustment
Ø 1.5" Heavy duty steel pipe

This heavy duty steel pole and bracket is designed to allow easy, firm and safe fixing of our wireless IP access point and bridge unit plus our other wireless CCTV antennas even during windy conditions without moving or bending.

Bracket must be very securely fixed to wall or other surface.