Our 4 Megapixel IP webcam has a resolution higher than 1080P at its maximum. With an adjustable bit rate, resolutions and 3 different streams avaialable, this camera is ideal when you want to use it for security recording and also a web display at the same time. It runs beautifully through our live streaming service and is small enough that it can be fitted almost anywhere. The total length from the base of the bracket to the tip of the sunshield when stretched to its full horizontal position is only 18 cm and is smaller when the bracket is adjusted in an angular position. The built in bracket has a full 3 axis adjustment so you can mount this IP camera anywhere and still square up the picture. Camera has POE so can be used with a POE switch or with our POE adaptor or a separate 12 volt PSU (sold separately)
4 Megapixel Mini Bullet IP Webcam
£174.00
This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.
4 Megapixel Mini IP Camera Specification
Image Sensor: 1/3" Aptina CMOS
Resolution: 4 Megapixel
Effective Pixels: 2688(H) x 1520(V)
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3-1/10,000s
Minimum Illumination: 0 Lux
S/N Ratio: >50dB
IR LEDs: Yes - Auto or Manual control
IR Cut: Yes
IR LED Range: 40m
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 3.6mm
Max Aperature: F2.0
Angle of View: H:83° V:45°
Compression: H265+/H.265/H.264+/H.264 - 3 Streams
Resolution: 4M, 3M, 1080P, 1.3M, 720P, D1, CIF
Main Stream Frame Rate: All resolutions@30fps
Sub Streams Frame Rate: All resolutions@30fps
Bit Rate: H:264: 24Kbps~10240Kbps H.265:14Kbps~9984Kbps
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif, PSIA, CGI
Smart Phone Support: iOS, Android, Windows Phone
POE: Yes - 802.3af
Input Voltage: DC12v or POE (PSU Not Included)
Power Consumption: Max 7.1W
Working Environment: -30°C~+60°C, Less than 95%RH
IP Rating: IP67
Dimensions: 180 x 70 x 70mm
Weight: 0.53Kg
Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.
When you need to grab every bit of detail from a picture but still need a small size camera then this is the one to choose. It has all the features you would expect from an HD camera including IR Cut and Dual Glass, 3 separate streams which are all adjustable and a 40 metre range from its built in IR LED's. An excellent camera at an even better price.
