4K provides users with better zoom capabilities and delivers greater detail out of an image than would have previously been possible, even with a higher megapixel camera. Our 4K range offers high clarity images and the greater pixel density of 4K resolution offers enhanced video analytic capabilities as improved image quality could double detection ranges. These cameras are ideal for use in high quality security systems where definition is of paramount importance and the level of digital zoom available with 4K is exceptional. to get the best from 4K cameras you need a 4K DVR which is able to record the extra high definition from the cameras and then of course you will need a 4K screen in order to view it in its highest definition.
The cameras have dual streaming mode too so they can be used for security in 4K resolution and still be used for live website displays when operating through our live streaming service. Camera has POE so can be used with a POE switch or with our POE adaptor or a separate 12 volt PSU (sold separately)
8 Megapixel 4K Bullet IP Webcam
£474.00
This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.
8 Megapixel 4K IP Camera Specification
Image Sensor: 1/2.3” 4K progressive scan CMOS
Resolution: 8 Megapixel
Effective Pixels: 3840(H) x 2160(V)
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3(4)-1/10,000s
Minimum Illumination: 0.1Lux/F1.6 (Color), 0Lux/F1.6(IR on)
S/N Ratio: More than 50dB
IR LEDs: Yes
IR Cut: Yes
IR LED Range: 30m
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 4mm
Max Aperature: F1.6
Angle of View: 80° Horizontal
Compression: H.264, MJPEG
Resolution:4K(3840×2160)3M(2048×1536)/1080P(1920×1080)/720P(1280×720) /D1(704×576/704×480) / CIF(352×288/352×240)
Main Stream Frame Rate: 4K(1~7fps)/3M/1080P/ (1 ~ 25/30fps)
Sub Stream Frame Rate: D1/CIF(1 ~ 25/30fps)
Bit Rate: H.264: 20K ~ 16Mbps
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif, PSIA, CGI
Smart Phone Support: iOS, Android, Windows Phone
POE: Yes - 802.3af
Input Voltage: DC12v or POE (PSU Not Included)
Power Consumption: Max 7.5W
Working Environment: -30° - +60° <95% Humidity
IP Rating: IP66
Dimensions: 178.4mm × 70mm × 69.9mm
Weight: 528g
Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.
