Our excellent 4 megapixel motorised zoom eyeball camera is perfect for when you may need to make adjustments to your cameras view from time to time. The 4 megapixel progressive scan sensore provides up to a massive 2688 x 1520 pixel picture and the motorised zoom and autofocus lens can be adjusted between a 2.7mm wide to 13.5 mm narrow field of view directly from the cameras web interface. The eyeball design means it can be mounted at awkward angles but still adjusted to give correct orientation of the view. Once the angle of view is manually set, the zoom of the camera can be adjusted remotely to give just the view you need. Then if you need to zoom out for any reason, no need to get back up to the camera. Plus finally the eyeball webcam has a dual IR LED array providing illumination in total darkness for up to 50 metres.
As with all our IP Webcams, the 4MP eyeball can operate with our live streaming service and we give a generous discount on our webcam hosting service with every webcam purchased from us. The design of the camera means that the fixings and cable entry into the building can be concealed once fitted and the camera can be used with a POE switch or with our POE injector or a 12 volt PSU (sold separately).
4 Megapixel Eyeball with 60 Metre IR Range
£278.00
This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.
4 Megapixel Eyeball IP Camera Specification
Image Sensor: 1/3" CMOS
Resolution: 4 Megapixel
Effective Pixels: 2688 x 1520
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3-1/10,000s
Minimum Illumination: 0 Lux
IR Range: 50 Metres
S/N Ratio: >50dB
IR Cut: Yes
Backlight Compensation: BLC, HLC, DWDR
White Balance: Auto, Sunny, Night, Outdoor, Customised
Gain Control: Auto, Manual
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 2.7mm ~ 13.5mm
Max Aperature: F1.4
Focus Control: Motorised
Angle of View: H:104°-28° V:55°-16°
Close Focus Distance 0.2 metre
Lens Type: Fixed Iris
Mount Type: Board Lens
Compression: H.264, MJPEG
3 x Streams available
Resolutions: 4M, 3M, 1080P, 1.3M, 720P, D1, CIF
Frame Rate: Main Stream: 4M@20fps, 3M@25fps Sub Stream: All Resolutions@25fps
Bit Rate: H:264: 24Kbps~10240Kbps H.265:14Kbps~8448Kbps
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif Profile S
Maximum Users: 20 Users direct access
Smart Phone Support: iOS, Android, Windows Phone
Micro SD Card Support: No
Alarm Inputs: No
Alarm Outputs: No
POE: Yes - 802.3af
Input Voltage: DC12v, POE
Power Consumption: Max 11.26W
Working Environment: -30°C - +60°C <95% Humidity
IP Rating: IP67
Dimensions: 122 x 102mm
Weight: 0.71kg
Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.