Camsecure Page Header Graphic
Camsecure Page Header 1200
IP Webcams and Cameras
IP Switches and POE

Our extra high quality range of IP switches and POE switches are ideal for linking and powering your IP cameras or for just general networking where you need HIGH QUALITY and EXTREME RELIABILITY in a network switch. We have standard switches, POE switches and POE+ switches in 10/100 or 10/100/1000 (gigabit) versions. We also have a gigabit switch with a fibre uplink port too. If you are just looking to power your camera via POE and use your existing standard network switches then our POE and POE+ injectors are the answer. If you need to run over long distance up to 800 metres with a single POE device and camera then use our ePoE switch and compatible cameras. Note for relaible POE transmission, especially over a longer distance, cable quality is very important and high copper CAT5-E or CAT6 cable is recommended rather than copper coated aluminium type cable.

You can find out about network cable requirements here and If you need more general information on POE, POE+ and GIGABIT standards and our new long distance ePoE system then you can find it here in our help section.

4 port 10-100 plus 1 port 1GB POE switch

4 Port POE switch with 1 x 1GBPS port too.

£85.00

4 Port POE Switch Specification

Model Number: PFS3106-4P-60

Product Type: 4 Port PoE Switch

Individual POE Port Limit: 30W

PoE Protocol: IEEE802.3af, IEEE802.3at

Exchange Mode: Store & Forward

Application Humidity: 10% ~ 90%

Power: DC53V Power Adapter

Operation Temperature: -30°C~+65°

Weight: 480g

Dimensions (W x D x H): 150mm x 100mm x 30mm

8 Port Gigabit Switch

8 Port Gigabit switch

£85.00

8 Port Gigabit Switch Specification

Model Number: EW-30800G
Product Type: 8 Port Switch
Network Speed: 8 x 10/100/1000Mbps
Network Standard: IEEE B802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE 802.3ab 1000BaseT, IEEE802.3x Flow Control
Features : 8-Port 1000BaseT
Data Transfer Rate : Ethernet: 10Mbps/Half Duplex 20Mbps/Full Duplex, Fast Ethernet: 100Mbps/Half Duplex 200Mbps/Full Duplex, Gigabit: 2000Mbps/Full Duplex
Transmissiom Media : 10BaseT Cat.3, 4, 5 UTP/STP, up to 100m, 100BaseTX Cat.5 UTP/STP, up to 100m, 1000BaseTX Cat.5, 6 UTP/STP, up to 100m
LED Indicators : Per Port:(TX): 10/100M Link/Act, PoE
Power Supply : 12VDC
Power Consumption : 6W
Operating Temperature : 0°C~+40°
Storage Temperature : -20°C~+90°
Humidity: 10 - 90% RH
Certifications: FCC, CE
Dimensions: 141x28x95mm
Weight : 375g

8 port 10-100 plus 1 port 1GB POE+ switch

8 Port POE+ switch with 1 x 1GBPS port too.

£147.00

8 Port POE+ Switch Specification

Model Number: PFS3110-8P-96

Product Type: 8 Port POE Switch

8 Port PSE/PoE+ function

Individual POE Port Limit: 30W

8 Port 10/100Mbps

1 Port 10/100/1000Mbps

PoE Protocol: IEEE802.3af, IEEE802.3at

Exchange Mode: Store & Forward

Application Humidity: 10% ~ 90%

Power: DC53V Power Adapter

Operation Temperature: -30°C~+65°

Weight: 540g

Dimensions (W x D x H): 150mm x 100mm x 42mm

4 port EPOE and High POE with 1GBPS Uplink

4 Port POE+ and EPOE switch with 1 x 1GBPS uplink.

£164.00

4 Port EPOE and High POE Switch Specification

Model Number: PFL2106-4ET-96
Product Type : 4 Port ePoE Switch
Industrial wide temperature design
1 10/100/1000 SFP port
Ethernet Port: 1 x 100/1000 Base-X, 1 x 10/100/1000 Base-T, 4 x 10/100 Base-T (PoE Supply)
PoE Power Consumption: Port 1/2/3 <30W, Port4 < 60W, Total <96W
PoE Protocol: IEEE802.3af, IEEE802.3at, Hi-PoE
Switching Capacity: 6.8Gbps
Packet Forwarding Rate : 3.57Mpps
Packet Buffer Memory: 1Mb
MAC Table Size: 8K
Flow Control: Enable by Default
Application Humdidty : 10%-90%
Power: DC48 - 57V
Lightning Protection : Common mode 4KV, Differential Mode 2KV
Working Temperature : -30°C~+65°
Weight : 480g
Dimensions: 150x100x30mm
Transmission Performance
100m: 100Mbps / 25.5W(PoE) / 53W(Hi-PoE)
200m: 100Mbps / 25.5W(PoE) / 33W(Hi-PoE)
300m: 100Mbps / 25.5W(PoE) / 19W(Hi-PoE)
400m: 10Mbps / 17W(PoE) / 17W(Hi-PoE)
500m: 10Mbps / 13W(PoE) / 13W(Hi-PoE)
800m : 10Mbps / 7W(PoE) / 7W(Hi-PoE)

16 Port Gigabit Switch

16 Port Gigabit switch

£194.00

16 Port Gigabit Switch Specification

Model Number: EW-31600G
Product Type: 16 Port Switch
Network Speed: 16 x 10/100/1000Mbps
All ports support Auto-MDIX function
Built-in 8K MAC learning table, 4.1M bits buffer memory, Jumbo Frame up to 9K bytes, packet length 9
Network Standard: IEEE B802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE 802.3ab 1000BaseT, IEEE802.3x Flow Control
Features : 16-Port 1000BaseT
Data Transfer Rate : Ethernet: 10Mbps/Half Duplex 20Mbps/Full Duplex, Fast Ethernet: 100Mbps/Half Duplex 200Mbps/Full Duplex, Gigabit: 2000Mbps/Full Duplex
Transmissiom Media : 10BaseT Cat.3, 4, 5 UTP/STP, up to 100m, 100BaseTX Cat.5 UTP/STP, up to 100m, 1000BaseTX Cat.5, 6 UTP/STP, up to 100m
LED Indicators : Per Port:(TX): 10/100M Link/Act, PoE
Power Supply : AC90-260V/AC 50-60Hz)
Power Consumption : 10W
Operating Temperature : 0°C~+40°
Storage Temperature : -20°C~+90°
Humidity: 10 - 90% RH
Certifications: FCC, CE
Dimensions: 263x44x160mm
Weight : 1.8Kg

4 Port POE+ With 1 Gigabit Fibre Uplink

4 Port POE Switch with Gigabit Fibre Uplink

£189.00

4 Port POE+ with 1GBPS Uplink Specification

5 ports 10/100/1000Mbps TX switching port
1 Gigabit Fiber SFP Slots
4 ports PoE function, compliant with IEEE 802.3af/at
Supports PoE Power Max. 30W per PoE/PSE port
Complies with IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE802.3ab 1000BaseT, IEEE 802.3z
1000Base-SX/LX, IEEE802.3az Green Ethernet
Compatible with IEEE 802.3x Flow control; back pressure for Half-duplex and Full-duplex mode
Built-in 2K MAC learning table, 128K bytes buffer memory, Jumbo Frame up to 9K bytes
Packet length 9216 bytes
Internal Power supply: AC input (90~260V/AC, 50~60Hz) UL Safety, 65W (55W PoE power budget)
Dimensions: 263x44x160mm (WxHxD)
Weight: 1.45Kg

Single Way POE Injector

POE Injector

£44.99

Single Way POE Injector Specification

10/100M PoE power injector
1x Data Input
1x Power Input
1x PoE Output
Inject 48v DC through CAT-5e cable
Compatible with IEEE 802.3af
Over voltage & short circuit protection
Transmit PoE up to 100M
LED Indicator
Dual DC power input (Terminal/DC Jack)
Wall Mountable
DC 48v 15.4W
PSU Included
Size: 80 x 68 x 24mm

Single Way Smart POE+ Midspan Injector

POE+ Midspan Injector

£140.00

Ideal to power our PTZ IP Dome Cameras

Single Way POE+ Midspan Injector Specification

Product Description: Smart PoE/PoE+ injector
Connector Type : 2 x 10/100/1000M RJ45 Ports
PoE Power Supply Type: PoE power supply is four line pairs of twisted pair, the positive power supply side is 1/2 or 4/5 line pair, the negative power supply side is 3/6 or 7/8 line pair
Network Medium : 10BASE-T: 5 class UTP (<100m), 100BASE-TX: 5 class or more UTP (<100m), 1000BASE-TX: 5 Class or more UTP(<100M)
Performance Specifications: PoE output Voltage: 48V-57V, Working Speed: 10/100/1000Mbps, MTBF:1900000 hours
Network Protocol and Standards: IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow Control, IEEE 802.1ab 1000BASE-T, IEEE802.3af DTE Power via MDI, Support LT PoE++ high power PoE standard, Compatible with IEEE 802.3af/IEEE 802.3at standard
Power: The Whole Power: 100W, Each port Output Power: 95W Voltage: 48V-57V
Working Temperature: -20°C~+55°C
Working Humidity: 10%-95%
Dimensions: 80 x 76 x 25mm

All our Network Switches and POE injectors have a 3 year warranty and are very high quality. If you want to power our IP PTZ cameras  then you need a POE+ or High POE injector or switch to accomodate the power requirement of these powerful devices. If you want to run ePoE to one of our ePoE compatible cameras then make sure to choose the ePoE switch (runs up to 800 metres). When using POE for any of our cameras it is recommended to use high grade CAT5-E or CAT6 cable to ensure the cable can carry the current sufficiently. You can find out more about these network cable types in our Help Section..

Social Media
Copyright-Banner