A range of supressors and filters for CCTV and IP systems to help protect against power surges, ground loop faults and high voltage spikes in your valuable CCTV and IP based systems and equipment.
Ground Loop Isolation Transformer
Insertion loss: 0.5dB
Frequency Response: 0-3dB at 10MHz
Connection: BNC
Isolation Voltage: 600VDC (Min)
Insulation Resistance: 100M ohm
Transient Voltage Suppressors: 5 V rms
Dimensions: 61x31x23mm
Weight: 48g
£16.60
Heavy Duty Ground Loop Filter
Impedance: 75 Ohms
Terminations: 75 Ohm BNC Sockets
Frequency Response H.F: -3dB Typcial 6.5 MHz
Insertion Loss (500kHz Typical): 1.0dB
Lp Pri / Sec (50Hz 1 volt RMS Typcial): 1.6H
Isolation Voltage (DC): 500 V
Operating Temperature Range: -10°C~+70°C
Storage Temperature Range: -40°C~+125°C
£82.99
Inline Mains Filter
Product Type: Inline Mains Filter
Voltage Rating: 110/250v
Current Rating: 3.5A
Current Overload: 3x Rated current for 8 seconds
Earth Leakage Current: 0.4mA Max 250v 50Hz
Temperature Range: -25C to 40C
Unit Weight: 295g
£26.00
RG59 Video Surge Protector
Model Number: 15-SP01A
Product Type: Surge Protector with Alarm Converter
Connections: 1x BNC Input, 1x BNC Output, 1x Alarm Terminals
Alarm Output : via BNC (for use with 15-VA101A, 15-VD102M)
Features: Built in 6KV Surge Protection, Built in 15KV Electrostatic Discharge
£12.50
