Camsecure Page Header Graphic
IP Webcams and Cameras
1.3 Megapixel IP Webcam

Our mini 13 Megapixel IP camera provides stunning performance at an amazing price. This little camera can be used as a security camera or a first class streaming webcam through our live streaming service. Being small in size this HD IP Webcam can be fitted almost anywhere and does not stand out as much as some of its bigger brother's. The total length from the base of the bracket to the tip of the sunshield when stretched to its full horizontal position is only 16.8 cm and is smaller when the bracket is adjusted in an angular position. The built in bracket has a full 3 axis adjustment so you can mount this IP camera anywhere and still square up the picture. Camera has POE so can be used with a POE switch or with our POE adaptor or a separate 12 volt PSU (sold separately)

1.3 Megapixel Mini Bullet IP Webcam

1.3 Megapixel Bullet IP Camera
1.3 Megapixel IP Webcam Dimensions

£144.00

This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.

1.3 Megapixel Mini IP Camera Specification

Image Sensor: 1/3" CMOS
Resolution: 1.3 Megapixel
Effective Pixels: 1280 x 960
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3-1/10,000s
Minimum Illumination: 0 Lux
S/N Ratio: >50dB
IR LEDs: Yes
IR Cut: Yes
IR LED Range: 30m
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 3.6mm
Max Aperature: F1.8
Angle of View: 70° Horizontal
Compression: H.264, MJPEG
Resolution: 1.3MP, 720P, D1, CIF
Main Stream Frame Rate: 25fps@ All Resolutions
Sub Stream Frame Rate: 25fps @ D1
Bit Rate: H.264: 32k - 8192Kbps
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif, PSIA, CGI
Smart Phone Support: iOS, Android, Windows Phone
POE: Yes - 802.3af
Input Voltage: DC12v or POE (PSU Not Included)
Power Consumption: Max 5W
Working Environment: -20° - +60° <95% Humidity
IP Rating: IP66
Dimensions: 168.1 x 66 x 58.4mm
Weight: 0.5Kg

Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.

Connectivity is one of this cameras strong points too. Its ideal for use with our live streaming service delivering crisp smooth video to your own website. For security you can use the free software supplied or one of the many webcam and IP camera software packages available. It is ONVIF 2.0 compliant for use with industry standard software and NVR's and it even has a mobile monitoring port so you can directly monitor the camera and even record clips from it directly to your own smart phone using one of the many freely available iPhone and Android app's.

When it comes to mounting the camera the built in 3 axis bracket is excellent. The cable comes straight out of the back so the entry hole into the building can be made behind it and the bracket fitted over the top totally concealling the cable. There is also an exit point for the cable in the side of the back plate so the cable can be easily run through this if preffered.

By loosening the back adjustment ring the camera can be panned, tilted and rotated to allow alignment of the camera's view whether fitted to a flat, sloping or uneven surface, and then secured in the correct position.

Social Media
Copyright-Banner