Camsecure Page Header Graphic
CCTV Power Supplies

The Camsecure range of CCTV Power Supply Units (PSU) are high quality power units for use with CCTV cameras, Infrared lamps etc. and provide a very stable and fully regulated 12 Volts DC supply or 24 Volt AC Output. Always select a power supply unit with adequate current capacity for the load. Remember that if you are measuring the current taken by all in one cameras that the load increases at night - when the LEDs come on, so allowance must be made for this extra current. Camsecure CCTV power supply units are specified in Milliamps (mA) or in Amps (A) depending on the capacity of the PSU. Remember that 500mA is the same as 0.5A which is half an Amp. If in any doubt please contact us for assistance.

12 Volt 2 Amp Encapsulated PSU

12 volt encapsulated PSU for CCTV

£14.99

12 Volt DC 2 Amp Encapsulated PSU

12v DC output
2A (2000mA) Regulated
240v Input
Inline
2.1mm DC jack plug
UK mains plug
12v lead size: 50cm length
Kettle lead size: 1M length

12 Volt 4 Amp Boxed PSU

4 Amp 12 volt Boxed PSU

£55.00

12 Volt DC 4 Amp Boxed PSU 

PTC resetable fuses
Surge protection
4 x Individually fused 1 Amp outputs 
Regulated
240v AC input
PG9 cable gland & knockouts
Powder coated (white)
Size: 180 x 150 x 50mm

High quality CCTV PSU in metal case, wall mounted, each output has its own LED indication for output status to help fault finding.

12 Volt 10 Amp Boxed PSU

10 Amp 12 volt Boxed PSU

£69.99

12 Volt DC 10 Amp Boxed PSU 

PTC resetable fuses
Surge protection
9 x Individually fused 1.25 Amp outputs
Regulated
240v AC input
PG9 cable gland & knockouts
Powder coated (white)
Size: 245 x 210 x 90mm

High quality CCTV PSU in metal case, wall mounted, each output has its own LED indication for output status to help fault finding.

12 Volt 20 Amp Boxed PSU

20 Amp 12 Volt PSU

£114.99

12 Volt DC 20 Amp Boxed PSU 

PTC resetable fuses
Surge protection
16 x Individually fused 1.25 Amp outputs
Regulated
240v AC input
PG9 cable gland & knockouts
Powder coated (white)
Size: 245 x 210 x 90mm

High quality CCTV PSU in metal case, wall mounted, each output has its own LED indication for output status to help fault finding.

24 Volt AC 2 Amp PSU

2 Amp 24 Volt AC PSU

£19.49

24 Volt AC 2 Amp In line PSU 

24v AC output
2A (2000mA) Unregulated
240v Input
Inline
Terminal connection
UK mains plug
1M lead

Ideal for high power IR LED lamps over a longer distance power lead run and any 24 volt AC device up to 2 Amps.

24 Volt AC to 12 Volt DC

24 volt to 12 volt DC to DC converter

£12.50

24 Volt AC to 12 Volt DC 2 Amp Converter 

12v DC output
2A (2000mA) Regulated
24v AC Input
Inline converter
2.1mm DC jack plug
Input: terminals

Ideal for high running a 12 volt DC device from the spare current on your 24 Volt AC system.

IP Camera POE Injector - IP Cameras Only

POE Injector for Camsecure IP Cameras

£44.99

POE Power Supply for IP Cameras Only 

10/100M PoE power injector
1x Data Input
1x Power Input
1x PoE Output
Inject 48v DC through CAT-5e cable
Compatible with IEEE 802.3af
Over voltage & short circuit protection
Transmit PoE up to 100M
LED Indicator
Dual DC power input (Terminal/DC Jack)
Wall Mountable
DC 48v 15.4W
PSU Included
Size: 80 x 68 x 24mm

POE Injector for our range of POE IP cameras. Must not be used with anything other than POE IP Camera's.

Social Media
Copyright-Banner