Camsecure Page Header Graphic
IP Webcams and Cameras
1.3 Megapixel Varifocal IP Camera

HD 1.3 Megapixel IP camera with a manually adjustable zoom and focus lens with an adjustment range between 2.7mm (wide) and 12mm (closer) which is fully variable anywhere within this range. A first class camera either for security or as a streaming webcam through our live streaming service. This is an ideal camera for when you arent completely sure which size lens you will need. This varifocal IP camera has many advanced features to ensure a great picture so check out the full specification below. The built in bracket has a full 3 axis adjustment so you can mount this IP camera anywhere and still square up the picture. Camera has POE so can be used with a POE switch or with our POE adaptor or a separate 12 volt PSU (sold separately)

1.3 Megapixel Varifocal Bullet IP Webcam

1.3 Megapixel Varifocal Bullet IP Camera
1.3 Megapixel varifocal IP Webcam Dimensions


This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.

1.3 Megapixel Varifocal IP Camera Specification

Image Sensor: 1/3" CMOS
Resolution: 1.3 Megapixel
Effective Pixels: 1280 x 960
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3-1/10,000s
Minimum Illumination: 0 Lux
S/N Ratio: >50dB
IR LEDs: Yes
IR Cut: Yes
IR LED Range: 30m
Backlight Compensation: BLC, HLC, DWDR
White Balance: Auto, Manual
Gain Control: Auto, Manual
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 2.7 ~ 12mm
Max Aperature: F1.4
Focus Control: Varifocal
Angle of View: 92° ~ 28° Horizontal
Lens Type: Fixed Iris
Compression: H.264, H.264H, MJPEG
Resolution: 1.3MP, 720P, D1, CIF
Main Stream Frame Rate: 25fps@ All other Resolutions
Sub Stream Frame Rate: 25fps @ D1/CIF
Bit Rate: H.264H: 40k - 8192Kbps; MJPEG: 40K ~ 16384Kbps
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif, CGI, PSIA
Smart Phone Support: iOS, Android, Windows Phone
POE: Yes - 802.3af
Input Voltage: DC12v, POE (PSU not included)
Power Consumption: < 4.5W
Working Environment: -30° - +60° <95% Humidity
IP Rating: IP66
Dimensions: 72 x 80 x 212.8mm
Weight: 0.65Kg

Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.

Connectivity is one of this cameras strong points too. Its ideal for use with our live streaming service delivering crisp smooth video to your own website. When you buy any IP camera from us we give you a great discount on our webcam hosting service too saving money every month. 

Social Media