Camsecure Page Header Graphic
IP Webcams and Cameras
Wireless IP Bridge & Range Extender

Our powerful & cost effective long range 5GHz outdoor wireless bridge and IP range extender is designed to extend the range of your wireless network so you can easily connect your wireless IP cameras and other wireless IP devices such as laptops and computers to your broadband or IP network. It is ideal for connecting out buildings or other external locations to your IP network over distances up to 5 miles line of sight when used as a point to point pair. It can also be configured as an external access point for more local use.

This is a high quality wireless IP device with integrated high gain antenna and it can operate in point to point and point to multipoint modes with 180Mbps throughput at a high PPS rate. The IP range extender comes with a powerful built in operating system and a comprehensive network management system. It has a highly advanced 802.11n radio core and MIMO 2x2 technology for improved antenna perfromance.

The IP booster can be used as a wireless bridge or router and it is supplied with very good program and management software which includes site survey and antenna alignment tools. The device also comes with a pole mount bracket to fit 1.5 inch diameter steel poles and it is fully IP66 rated weatherproof. The recommended mounting pole found here is strong and ideal for mounting this unit.

5GHz Wireless IP Bridge and Range Extender

Outdoor Wireless Access Point
Outdoor Wireless Bridge

£239.99

Suitable Mounting Pole and Fixings Here

5GHz Wireless MIMO IP Bridge Specification

WIRELESS
WLAN Standard: IEEE 802.11 a/n, iPoll (proprietary)
Radio Mode: MIMO 2x2
Radio Frequency Band: 5.150 - 5.850 GHz (FCC 5.745 - 5.825 GHz)
Transmit Power: Up to 29 dBm (country dependent)
Receive Sensitivity: Varying between -97 and -75 dBm depending on modulation
Channel Size: 5,10, 20, 40 MHz
Modulation Schemes: 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Data Rates: 802.11 n: 300,270,240, 180, 120, 90, 60, 30 Mbps 802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Error Correction: FEC, Selective ARQ
Duplexing Scheme: Time Division Duplex
ANTENNA
Type: Integrated directional dual-polarized panel
Gain: 20 dBi, Range up to 5 miles line of sight between units
NETWORKING
Wired Interface: 10/100 Base-T, RJ45
Operating Modes: Bridge, Router
WAN: Static IP, DHCP Client, PPPoE Client
NAT: Routing w/ or w/o NAT
Static Routing: Supported
DHCP: Client, Server, Relay
Port Forwarding: Supported
VLAN: Supported for management and data
SOFTWARE
Wireless Operating Modes: Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)
Wireless Techniques: Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC)
Wireless Security: WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, User isolation
Wireless QOS: 4 queues prioritization on iPoll 2
Network Operating Modes: Bridge, Router iPv4, Router IPv6
Network Techniques: Routing with and without NAT, VLAN
WAN Protocols: Static IP, DHCP Client, PPPoE Client
Services Watchdog: DHCP server, SNMP server, NTP client, router advertisement daemon, ping
Management: HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet
Tools: Site survery, Link test, Antenna alignment
PHYSICAL
Dimensions: 205x205x45mm
Weight: 700g
Power Supply: 24v Passive POE (Injector Included)
Power Consumption: 4.5W
ENVIROMENTAL
Operating Temperature: -40°C - +65°C
Humidity: 0 - 90% (non-condensing)
MANAGEMENT
System Monitoring: SNMP v1/2c/3 server, Syslog, System alerts via email and SNMP trap
REGULATORY
Certification: FCC/IC/CE

This is a really flexible outdoor IP ramge extender, you can use it as an outdoor wireless access point to add wireless connectivity or boost the the existing wireless signal on your existing system, or use it as an outdoor wireless router, or you can use two of these units to build a long range outdoor wireless bridge IP network system or even use multiple units as long range outdoor smart stations. Use for IP cameras or full network extensions, its a reliable and versatile device.

NOTE:- It is strongly advised to use the recommended mounting pole found here to pole mount this unit as due to its weight a TV aerial type aluminium pole will not be adequate especially in strong wind. Bear this in mind if you plan to use your own pole and make sure its at least 1.5 inch in diameter and made of steel.

Social Media
Copyright-Banner