Mini Indoor IP Webcam

Our mini indoor IP webcam model CSIP-5IR-58D is a simple to setup IP camera allowing you to view the camera either on your local area
network, over the internet, on your own website and on your smartphone. The camera comes with a 3.6mm lens giving a visual angle of 67
degrees. The mini IP camera is fitted with 5 Infra red LED's too which provide night visibility for up to 7 meters.

Our mini IP webcam can also be used with popular software including Active Webcam, iCatcher, iSee and many more, and can even be used
with Zoneminder for Linux too. They are small and flexible and easy to integrate into your own website with the code we provide with each one.
Use it for security or as a "nanny cam" or have it stream to your own personal website.

Specification Model CSIP-51R-58D

Image Sensor - 1/4" High Definition Color CMOS Sensor
Display Resolution - 640 x 480 Pixels(300k Pixels)
Lens - Standard:3.6mm, F:2.4 (IR Lens)
Lens Type - Glass Lens
Visual Angle - 67°
Mini. Illumination - 0.5Lux
Image Compression - MJPEG
Image Frame Rate - 15fps(VGA),30fps(QVGA)
Resolution - 640 x 480(VGA), 320 x 240(QVGA)
Flip Mirror Images - Vertical / Horizontal
Light Frequency - 50Hz, 60Hz or Outdoor
Video Parameters - Brightness, Contrast
Night Visibility - 5 IR LEDs, Night visibility up to 7 meters
Audio Compression - ADPCM
Input - Built-in Microphone
Output - Built-in Speaker

The mini IP camera can be mounted the right way up or upside down if necessary as it has switchable "flip" and "mirror" functions so you can still
see the picture the correct way up. If you want to use the camera for security then it can be set up to send email alerts and a still picture to your
email address when it detects movement. Should you or your web designer need assitance getting your camera on your site then we provide free
telephone support too.

Our indoor mini IP webcam has both a wired and wireless network interface to make it easy to connect via your preferred method. Wireless
interface incorporates WEP (disable/64 bit/128 bit) or WPA/WPA2 encryption. Cameras are supplied complete with a 5 Volt 2 Amp PSU plus
full instructions on how to use the camera and set it up, and also code samples and instructions for putting your cameras on your website.

Do i need any extra software?

The camera is supplied with everything you need to be able to view the camera over the Internet or local network, embed the live feed into your
website and receive email alerts on movment detection - you need nothing else to accomplish this. However, should you wish to use this camera
for recording as a security system then we recommend Active Webcam software, or for really serious professional use, Argus DVR software.