Camsecure Page Header Graphic
IP Webcams and Cameras
4 Megapixel 50 Metre IR Range

This is an ideal IP webcam for use as security or on your own website when you need excellent resolution coupled with a long range night view capability. The single LED array provides up to 50 metres illumination at night and the 4 megapixel sensor pulls in every last bit of detail that it can. Camera has a 3.6 mm lens which gives an 81 degree horizontal angle of view. As with all our IP cameras it can operate with our live streaming service and we give a generous discount on our streaming service with every webcam purchased from us. The design of the camera means that the fixings and cable entry into the building can be concealed once fitted and the camera can be used with a POE switch or with our POE injector or a 12 volt PSU (sold separately).

4 Megapixel with 50 Metre IR Range

4 Megapixel IP Camera with 50 metre IR range
4 Megapixel Bullet Camera Dimensions

£189.99

This camera can be powered directly from a POE router or POE switch. It can also be powered from a separate 12 volts DC supply. If you need a power supply or POE Injector click here.

4 Megapixel IP Camera Specification

Image Sensor: 1/3" CMOS
Resolution: 4 Megapixel
Effective Pixels: 2688 x 1520
Scanning System: Progressive
Electronic Shutter Speed: Auto, Manual, 1/3-1/10,000s
Minimum Illumination: 0.05 Lux
S/N Ratio: >50dB
IR Cut: Yes
Backlight Compensation: BLC, HLC, DWDR
White Balance: Auto, Sunny, Night, Outdoor, Customised
Gain Control: Auto, Manual
Noise Reduction: 3DNR
Privacy Masking: 4 Areas
Lens Size: 3.6 mm
Max Aperature: F2.0
Focus Control: Fixed
Angle of View: 81° Horizontal
Lens Type: Fixed Iris
Mount Type: Board Lens
Compression: H.264, MJPEG
Resolution: 4MP, 3MP, 1080P, 720P, D1, CIF
Main Stream Frame Rate: 20fps @ 4MP
25fps @ All other resolutions
Bit Rate: 32k - 8192Kbps (H.264)
Ethernet Type: RJ-45 10/100
Onvif Compatible: Onvif Profile S
Maximum Users: 20 Users direct access
Smart Phone Support: iOS, Android, Windows Phone
Micro SD Card Support: No
Alarm Inputs: No
Alarm Outputs: No
POE: Yes - 802.3af
Input Voltage: DC12v, POE
Power Consumption: Max 4W
Working Environment: -30°C - +60°C <95% Humidity
IP Rating: IP67
Dimensions: 90 x 241.8mm
Weight: 0.61kg

Our POE enabled IP cameras are not supplied with a power supply as you may wish to use them on an existing POE router or switch so this keeps the cost of the camera down. If you want to power the camera down the same network cable that connects to your existing router that is not POE enabled then you can use our POE Injector, or you can use a separate 12 volts DC 2 amp power supply if you wish instead. These can be found in our power supply section.

Social Media
Copyright-Banner